Second alternative method of setting up WiFi on HAM DinMeter3P (Android)
Ilias Dadis
Last Update 2 yıl önce
If none of the previous methods (suggested and alternative) are able to configure the device's WiFi, there is an alternative method described below.
WiFi setup steps
- Check that we have closed the data of our device
- Go to the HAM DinMeter3P device and press the setup button until the green LED starts flashing.
- Go to the WiFi settings of our mobile phone.
- Wait for the network called HAMXX_XXXXXX to appear.
- Connect to the network HAMXX_XXXXXX by entering the D/K of our device as code
- Wait for the connection to be made (it is possible that it says there is no network connection)
- Go to any browser (we recommend Chrome), type in the search bar "192.168.4.1".
- Make sure we have typed the address correctly and press "go".
- On the page that takes us, select the WiFi we want to connect to from the list
- Enter the WiFi password in the appropriate field
- Click on "Submit
- Make sure that the green LED is permanently lit.
- Close the tabs we have opened for setup and go to the HAM Systems application.
- Follow the device registration steps as described below
Device registration steps
- Check that the device is on and the green light is on permanently
- Click on the "add" symbol (+) that appears in the devices menu
- Select the button that says "Add device"
- Enter the D/K of the device in the blank and press "Submit"