First alternative method of setting up HAM DinMeter3P WiFi device (iPhone)
Ilias Dadis
Last Update 2 tahun yang lalu
If you follow the steps described in the suggested WiFi setup article, it is possible that our network data will not be sent within the time limit. If this happens, follow these steps.
WiFi setup steps
- Press the "add" icon (+) that appears in the Devices menu.
- Select the category in which the DinMeter3P is located.
- Enter the WiFi network name and password in the corresponding fields.
- Check carefully that we have not made any spelling mistakes
- Press the 'Next' button
- Go to the HAM DinMeter3P device and press the setup button until the green LED starts flashing.
- Return to the application and press 'Next'.
- Check that the LED is flashing green.
- Once the preset time has elapsed, ensure that we are presented with a list of options.
- From the list that appears, select "Flashing".
- In the menu that appears, select the button that says "Alternatives".
- On the page it takes us to, we select the blue letters that say "Settings".
- This takes us to the mobile network settings where we look for the network called HAMXX_XXXX.
- Connect to the network HAMXX_XXXX by entering the D/K of our device as a code.
- Wait for the connection and when we are sure, we go back to the application (there is a possibility that it will say that there is no network connection).
- In the options presented to us, we choose that the green LED flashes.
- On the new page that appears, we scroll down and select the blue numbers "192.168.4.1".
- Check the green LED, if it remains green, we are taken back to the application.
If we have followed all the steps correctly and have not made any spelling mistakes in the network name and password, the green LED will remain lit and a window will appear for us to enter the D/K of our device.
Device registration steps
If we have followed all the steps to configure the Wi-Fi, but the window to register the device has not appeared, we need to do the following.
- Check that the device is switched on and that the green light is permanently on.
- Click on the "Add" icon (+) that appears in the Devices menu.
- Select the last button that says "Add device".
- Enter the D/K of the device in the blank and click on "Submit".