Apply, set up WiFi and register your HAM DinMeter3P device (iPhone)
Ilias Dadis
Last Update 2 tahun yang lalu
Once the device has been installed, the next step is to install the application and configure the WiFi so that the device can communicate with the application.
Application installation steps
- Download the app from the App Store
- Create a new account
- Confirm account creation by following the link sent to your email.
Wifi setup steps
- Press the "add" icon (+) that appears in the Devices menu.
- Select the category in which the DinMeter3P is located.
- Enter the WiFi network name and password in the corresponding fields.
- Check carefully that we have not made any spelling mistakes
- Press the 'Next' button
- Go to the HAM DinMeter3P device and press the setup button until the green LED starts flashing.
- Return to the application and press "Next".
- Wait for it to send the codes and watch the green LED until it stays solid green.
If we have followed all the steps correctly and have not made any spelling mistakes in the network name and password, the green LED will remain lit and a window will appear for us to enter the D/K of our device.
Device registration steps
If we have followed all the steps to configure WiFi, but the window to register the device has not appeared, we need to do the following.
- Check that the device is switched on and that the green light is steady.
- Click on the 'Add' icon (+) that appears in the Devices menu.
- Select the last button that says "Add device".
- Enter the D/K of the device in the empty field and click on "Submit".