Second alternative method of setting up WiFi on the HAM RemoteAC device (iPhone)
Ilias Dadis
Last Update 2 years ago
In case none of the previous methods (suggested and alternative) are able to configure the WiFi of the device, there is an alternative method which is described below.
WiFi setup steps
- Check that we have closed the data of our device
- Go to the HAM RemoteAC device and press the bottom button until the green LED starts flashing
- Go to the WiFi settings of our device
- Wait for the network to appear with the name HAMXXX_XXX
- Connect to the network HAMXX_XXXX by entering the D/K of our device as a code
- Wait until it connects (it may say there is no network connection)
- Go to any browser (We recommend Safari), type in the search bar "192.168.4.1"
- Make sure we typed the address correctly and press "go"
- On the page that takes us to, we select the WiFi we want to connect to from the list
- Enter the WiFi password in the corresponding field
- Click "Submit"
- Make sure that the green LED is permanently lit
- Follow the device registration steps as described below
Device registration steps
- Check that the device is on and the green light is on permanently
- Click on the "add" symbol (+) that appears in the devices menu
- Select the last button that says "Add device"
- Enter the D/K of the device in the blank and press "Submit"