First alternative method of setting up WiFi on HAM RemoteAC (Android)
Ilias Dadis
Last Update 2 tahun yang lalu
By following the steps described in the suggested way, it is possible that the network data will not be sent within the time limit. If this happens we follow the following steps.
WiFi setup steps
- Press the "add" symbol (+) that appears in the devices menu
- Select the category of the HAM RemoteAC
- Enter the WiFi network name and password in the corresponding fields
- Carefully check that we have not made a spelling mistake
- Press the button that says "Next"
- Go to the HAM RemoteAC device and press the bottom button until the green LED starts flashing
- Return to the application and press "Next"
- Make sure the LED is flashing green
- Once the predetermined time limit has passed we make sure we are presented with a list of options
- From the list that appears select "flashing"
- In the menu that appears select the button that says "Alternatives"
- On the page it takes us to select the blue letters that say "Settings"
- It takes you to the mobile network settings where you are looking for the network named HAMXX_XXXX
- Connect to the network HAMXX_XXXX by entering the D/K of our device as a code
- Wait until it connects and once we are sure we go back to the application (There is a possibility that it says there is no network connection)
- From the list that appears we select "blinking"
- On the new page that appears scroll to the bottom and select the blue numbers "192.168.4.1"
- Check the green LED, once it stays green we go back to the application
In case we have followed all the steps correctly and we have not made a spelling mistake in the network name and the password the green LED will remain permanently lit and will show us a window in which we have to fill in the D/K of our device.
Device registration steps
In case we have followed all the steps to configure WiFi but the window for registering the device has not appeared, we must do the following.
- Check that the device is on and the green light is on permanently
- Click on the "add" symbol (+) that appears in the devices menu
- Select the last button that says "Register device"
- Enter the D/K of the device in the blank and press "Submit"