Second alternative method of setting up WiFi on HAM DinSwitch (iPhone)
Ilias Dadis
Last Update 2 tahun yang lalu
In case none of the previous methods (suggested and alternative) are able to configure the WiFi of the device, there is an alternative method which is described below.
WiFi setup steps
- Check that we have closed the data of our device
- Go to the HAM DinSwitch device and press the setup button until the green LED starts blinking
- Go to the WiFi settings of our device
- Wait for the network named HAMXXX_XXXXXX to appear
- Connect to the network HAMXX_XXXX by entering the D/K of our device as a password
- Wait until it connects (it may say there is no network connection)
- Go to any browser (We recommend Safari), type in the search bar "192.168.4.1"
- Make sure we typed the address correctly and press "go"
- On the page that takes us to, we select the WiFi we want to connect to from the list
- Enter the WiFi password in the corresponding field
- Click "Submit"
- Make sure that the green LED is permanently lit
- Close the tabs we opened for the setup and go to the HAM Systems application
- Follow the device registration steps as described below
Device registration steps
- Check that the device is on and the green light is on permanently
- Click on the "add" symbol (+) that appears in the devices menu
- Select the last button that says "Register device"
- Enter the D/K of the device in the blank and press "Submit"