Apply, set up WiFi and register your HAM DinSwitch device (iPhone)
Ilias Dadis
Last Update 2 tahun yang lalu
After installing the device, the next step is to install the application and configure the WiFi so that the device can communicate with it.
Application installation steps
- Download the app from the App Store
- Create a new account
- Confirm account creation by following the link sent to your email.
Wifi setup steps
- Press the "add" symbol (+) that appears in the devices menu
- Select the category that the DinSwitch has
- Enter the WiFi network name and password in the corresponding fields
- Carefully check that we have not made a spelling mistake
- Press the button that says "Next"
- Go to the HAM DinSwitch and press the setup button until the green LED starts flashing
- Go back to the application and press "Next"
- Wait for it to send the codes and watch the green LED until it stays solid green
If we have followed all the steps correctly and have not made any spelling mistakes in the network name or password, the green LED will stay permanently lit. At that point, a window will appear prompting us to enter the D/K of our device.
Device registration steps
If we have followed all the steps to configure WiFi but the window for registering the device has not appeared, we must do the following.
- Check that the device is on and the green light is on permanently.
- Click on the "add" symbol (+) that appears in the devices menu.
- Select the last button that says "Add device".
- Enter the D/K of the device in the blank and click "Submit".