Apply, set up WiFi and register your HAM DinSwitch device (Android)
Ilias Dadis
Last Update hace 2 años
Once the device has been installed the next step is to install the application and configure WiFi so that the device can communicate with the application.
Application installation steps
- Download the app from the Play Store
- Create a new account
- Confirm account creation by following the link sent to your email.
WiFi setup steps
- Press the "add" symbol (+) that appears in the devices menu.
- Select the category the DinSwitch is in.
- Give location permissions to the HAM application
- Select the WiFi network and enter the code in the corresponding fields
- Carefully check that we have not made a spelling mistake.
- Press the button that says Next
- Go to the HAM DinSwitch device and press the setup button until the green LED starts flashing
- Return to the application and press "Next"
- Wait for it to send the codes and watch the green LED until it stays solid green
If we have followed all the steps accurately and have not made any spelling mistakes in the network name and password, the green LED will remain lit continuously. This will prompt a window to appear, where we need to enter the D/K of our device.
Device registration steps
If we have followed all the steps to configure the wifi but the window for registering the device has not appeared, we must do the following.
- Check that the device is on and the green light is on permanently
- Click on the "add" symbol (+) that appears in the devices menu
- Select the last button that says "Add device"
- Enter the D/K of the device in the blank and press "Submit"