Second alternative method of setting up WiFi on HAM ThermoSense (Android)
Ilias Dadis
Last Update 8 tháng trước
In case none of the previous methods (suggested and alternative) can configure the device's WiFi, there is an additional method described below.
WiFi setup steps
- Check that we have closed the data of our device
- Go to the HAM ThermoSense device and press the bottom button until the green LED starts flashing
- Go to the WiFi settings of our mobile phone
- Wait for the network with the name HAMXX_XXXXXX to appear
- Connect to the network HAMXX_XXXXXX by entering the D/K of our device as a code
- Wait until it connects (there is a possibility that it says there is no network connection)
- Go to any browser (We recommend Chrome), type in the search bar "192.168.4.1"
- Make sure you typed the address correctly and hit "go"
- On the page that takes us to, we select the WiFi we want to connect to from the list
- Enter the WiFi password in the corresponding field
- Click "Submit"
- Make sure that the green LED is permanently lit
- Close the tabs we opened for the setup and go to the HAM systems application
- Follow the device registration steps as described
Device registration steps
- Check that the device is on and the green light is on permanently
- Click on the "add" symbol (+) that appears in the devices menu
- Select the button that says "Add device"
- Enter the D/K of the device in the blank and press "Submit"