HAM ThermoSense graphs and data
Ilias Dadis
Last Update 6 ay önce
In addition to live and continuous information, through displays and operating rules, HAM Systems provides you with the possibility to check the temperature values in aggregate for specific periods of time. From the data charts you can draw very useful conclusions about the conditions of your cold room, and thus about the appropriate interventions you can make to adapt them to your needs.
Data chart access and configuration
You can access the detailed data charts of the HAM ThermoSense devices from the "Data" tab in the main menu of our application. In this tab you can define the factors on which the charts are generated.
- Time base. You can set the time base on which the chart you want to see will be displayed (daily, weekly, monthly or yearly). You can also arbitrarily define the time base, depending on a specific period of time for which you are interested in knowing data
- Physical size. You can specify the measurement (temperature) for which you want the chart to be generated
- Devices. You can select two or more devices, the data of which will be displayed in the diagram in a comparison. In the diagram you will see each device in a specific colour. The colour corresponding to each device is shown directly next to the name of that device.
Indications and conclusions from the data charts
Data charts offer you a variety of possibilities and information about the temperature levels of your cold room. As an indication, we list some important conclusions that you can see through the charts:
- The overall distribution of temperature values in your cold room, on a daily, weekly, monthly and annual basis
- The times when the temperature is higher, lower, or shows a certain value
- Abrupt changes (spikes) in the temperature of an appliance and the time at which they occur
- Which cold chamber may be more efficient, between two chambers over time