HAM DinSwitch settings
Ilias Dadis
Last Update 6 maanden geleden
After connecting to the wifi and registering the device, we are ready to edit it to suit our needs. To enter the submenu of our device settings we follow the steps below:
- Select the device we want to edit
- Click on the button that says more
- We go to the Settings category and select it
Options displayed
- "Pulses per kWh". In the blank space we put the pulses with which our device will measure in case we have installed transformers or an external energy meter.
- "Cost per kWh". In the blank that has we enter the price of the kWh according to the provider we have.
- "Cost per kWh (alternative metering)". In the blank space we enter the price of the kilowatt-hour in case there is a different type of billing for example night-time electricity.
- "Fixed costs". We enter an average value of the fixed costs present in the electricity bill according to our provider.
- "Charge per". We select the billing cycle for which we want to see the charge forecast.
- "Included in summaries" checkbox. By selecting it, the prices of the appliance we want will be displayed in the main pie of the "Appliances" menu
- Button named "Advanced". Pressing it displays additional settings that will be explained below
Additional settings (Advanced)
- Checkbox named "Allow control from LAN". By selecting it, we give the device access to accept commands from the local LAN
- Checkbox named "Disable local control". By selecting it, our device will only be controlled by accounts that are connected to the same network.
- Checkbox named "Disable logging". By checking it, our device stops logging and shows us the last measurement it had before we enabled this option