First alternative method of setting up WiFi on HAM DinMeter3P (Android)
Ilias Dadis
Last Update há 6 meses
It is possible that the network data will not be sent within the time limit if the steps described in the suggested method are followed. If this happens, follow the steps below.
WiFi setup steps
- Press the "add" icon (+) that appears in the Devices menu.
- Select the category in which the DinMeter3P is located.
- Enter the WiFi network name and password in the corresponding fields.
- Check carefully that we have not made any spelling mistakes
- Press the 'Next' button
- Go to the HAM DinMeter3P device and press the setup button until the green LED starts flashing.
- Go back to the application and press the 'Next' button.
- Check that the LED is flashing green.
- Once the pre-set time has elapsed, we will be presented with a list of options.
- From the list that appears, select "Flashing".
- In the menu that appears, select the button that says "Alternatives".
- On the page it takes us to, we select the blue letters that say "Settings".
- This takes us to the mobile network settings where we look for the network called HAMXX_XXXX.
- Connect to the HAMXX_XXXX network by entering the D/K of our device as the code.
- Wait for the connection to be made and, once we are sure, go back to the application (there is a possibility that it will say that there is no network connection).
- From the list that appears, select "flashing".
- On the new page that appears, scroll down and select the blue numbers "192.168.4.1".
- Check the green LED, if it remains green, we go back to the application.
If we have followed all the steps correctly and have not made any spelling mistakes in the network name and password, the green LED will remain lit and a window will appear for us to enter the D/K of our device.
Device registration steps
If we have followed all the steps to configure WiFi, but the window to register the device has not appeared, we must do the following
- Check that the device is switched on and that the green light is permanently on.
- Click on the "Add" icon (+) that appears in the Devices menu.
- Select the last button that says "Register device".
- Enter the D/K of the device in the space provided and press "Submit".