Control and modify the security level of the Firewall
Customize the security of a WiFi router's Firewall
Panos Alexopoulos
Last Update 2 jaar geleden
One of the causes that may prevent a HAM device from accessing the Internet is if your router is behind a "Firewall", whose security level you need to lower in order to address the problem.
Audit
Depending on your network provider, you can go to the Firewall settings either directly (1), or in the "Security" section of the settings menu (2).
Modification
You can fully remove your router's firewall (1), or reduce the size of its security (2), to see if the HAM device will be able to connect.
In case you do not wish to lower the Firewall, to ensure that you do not lose a layer of protection for your network, you can still connect your HAM devices to your Wi-Fi, following the instructions in our article on this subject, by clicking here.