App, set up WiFi and register a HAM HumiSense device (iPhone)
Ilias Dadis
Last Update hace 2 años
Once the device has been installed the next step is to install the application and configure WiFi so that the device can communicate with the application.
Application installation steps
- Download the app from the App Store
- Create a new account
- Confirm account creation by following the link sent to your email.
Wifi setup steps
- Press the "add" symbol (+) that appears in the devices menu
- Select the first category that has HumiSense
- Enter the WiFi network name and password in the corresponding fields
- Carefully check that we have not made a spelling mistake
- Press the button that says "Next"
- Go to the HAM HumiSense device and press the bottom button until the green LED starts flashing
- Go back to the app and press "Next"
- Wait for it to send the codes and watch the green LED until it stays permanently lit green
In case we have followed all the steps correctly and we have not made a spelling mistake in the network name and the password the green LED will remain permanently lit and will show us a window in which we have to fill in the D/K of our device.
Device registration steps
If we have followed all the steps to configure WiFi but the window for registering the device has not appeared, we must do the following.
- Check that the device is on and the green light is on permanently
- Click on the "add" symbol (+) that appears in the devices menu
- Select the last button that says "Register device"
- Enter the D/K of the device in the blank and press "Submit