Alternative setup settings
Ilias Dadis
Last Update hace 6 meses
If we choose to configure our device using an alternative method, i.e. select the Alternative Methods button, we will be taken to the following pages.
1. The first page that appears has as an option Settings where it takes us to the Wifi settings of our mobile phone to connect to the access point that will be created by the HAM device.
In case we connect to the Access point according to the instructions we have to go back to the application where the following option appears.
1. List to select the status of the LED.
2. Selecting that the led is on will take us to the next page of settings.
3. Selecting that the led is off, advises us to wait a little for the data to be sent. If it does not stay on permanently after some time, it means that we have made a mistake in the network data.
4. Selecting that the LED is on, gives us two options, either to go to the device registration page or to the main dashboard.
If the led is blinking and we select the corresponding field it will take us to a third page which is described below.
1. Option that the led is flashing.
2. Button that takes us back to the wifi settings of the mobile phone.
3. IP address which we need to select to send the wifi data to our device.